Setting up a Brick Paver Walkway or Brick Tile Accessories

Using Installing a Brick Paver Walkway or Brick Making Plant or Pavers to produce a pathway or patio area matches a house in a way that is unrivaled. It adds a level of quality and beauty to a home entryway that can not be achieved with either concrete or asphalt. Brick and Pavers also are available in numerous different colors and shapes enabling special color design and patterns to be accomplished. In addition, installing a Brick or Paver pathway does not necessarily require a pro. With some standard understanding and a fairly simple sidewalk plan, a property owner is capable of undertaking such a task.

The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be set up. The area must be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines should be strung on each side of the pathway. The string lines indicate the completed height of the pathway.
As soon as the area has actually been dug down, 3/4" gravel stone must be laid in and tamped down tightly. 2" of sand, or stone dust must be spread out over the gravel. Again the sand/stone dust must be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipe or journal board the length of the walkway on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your pathway border and help to maintain the integrity and shape of the pathway.

As soon as this is done, you can then start to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again help keep the stability of the walkway.

When developing the walkway, inevitably bricks/pavers will need to be cut or split. Unless you want to buy or lease a pricey wetsaw, I would recommend purchasing a simple brick/paver splitter. It is essentially a chisel with a wide end that is the width of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you desire to break the brick. Then utilizing a hammer strike the butt end of the chisel firmly. You might need to do this a number of times. You might also want to turn the brick/paver over and strike the other side of the brick using the hammer and chisle. Within a couple of strikes the brick/paver need to break cleanly. , if your walkway has curves you will require to buy/rent a wetsaw.

.

After setting up more info the bricks, build up the outdoors edges with additional sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the brand-new walkway and sweep into the cracks. This will finish the interlocking of the bricks and help to get rid of any more info weed development.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, put a 1" pipeline or journal board the length of the pathway on either side of the walkway. These strips will act as your pathway border and assistance to keep the stability and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or split when building the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Brick Tile Accessories”

Leave a Reply

Gravatar